Pyxis system would use GPS signals to gather more accurate weather forecasts

planetiq-pyxis

Soundings from 12 PlanetiQ satellites within 24 hours

PlanetiQ has begun testing its new Pyxis weather instrument. Pyxis tracks GPS signals traveling through the atmosphere and makes measurements based on their behavior. PlanetiQ says it can “dramatically improve weather forecasting, climate monitoring and space weather prediction.”

Like Spire, PlanetiQ plans to launch a constellation of microsatellites with weather monitoring technology installed, and Pyxis will be one of the instruments that the PlanetiQ satellites will host. It uses a technique called GPS Radio Occultation (GPS-RO) in which GPS signals in the atmosphere are tracked and converted into measurements of global temperature, pressure and water vapor.

PlanetiQ explains that the data collected will be much like that of weather balloons, but on a greater scale. Using an initial constellation of 12 satellites, the company says it will be able to make over 8 million observations of temperature, pressure and water vapor per day, which equates to more than 10 times the amount of data that current GPS-RO sensors in orbit are able to produce.

GPS-RO is said to be a highly accurate means of forecasting and particularly effective at predicting high-impact weather such as hurricanes and winter storms. Its sensor technology is able to penetrate through clouds and to the lowest layers of the atmosphere where severe weather occurs. Until now, however, there has simply been a lack of GPS-RO data available.

“The Earth’s atmosphere is radically under-sampled at present, especially over the oceans which cover 70 percent of the Earth’s surface,” says PlanetiQ Founder Chris McCormick. “With the speed of innovation in sensor technology, space hardware and launch, the weather forecast will dramatically change for the better in the near future.”

The PlanetiQ initial constellation of 12 satellites is expected to be launched in 2016 and 2017.

References:http://www.gizmag.com/

Engineers create a computer with a water droplet processor

water-droplet-computer

From driving water wheels to turning turbines, water has been used as the prime mover of machinery and the powerhouse of industry for many centuries. In ancient times, the forces of flowing water were even harnessed to power the first rudimentary clocks. Now, engineers at Stanford University have created the world’s first water-operated computer. Using magnetized particles flowing through a micro-miniature network of channels, the machine runs like clockwork and is claimed to be capable of performing complex logical operations.

Using poppy-seed sized droplets of water impregnated with magnetic nanoparticles (those handy little elements being used in everything from drug delivery in humans to creating e-paper whiteboards), the new fluidic computer uses electromagnetic fields to accurately pump these droplets around a set of physical gates to perform logical operations. Suspended in oil and timed to move in very specific steps, the droplets in the system can theoretically be used to accomplish any process that a normal electronic computer can, albeit at considerably slower speeds.

Stanford assistant professor Manu Prakash has spent almost a decade thinking about such a device, ever since he was a graduate student. The many and varied components required of a fluidic computer have slowly coalesced in his mind over that time, with the most fundamental component of all – an accurate operating clock to drive the logic – being the crucial element in bringing his invention to fruition. Ultimately, Prakash built a rotating magnetic field to synchronize the flow of all the droplets in a precisely timed manner, and act as the clock.

“The reason computers work so precisely is that every operation happens synchronously; it’s what made digital logic so powerful in the first place,” says Prakash. “In this work, we finally demonstrate a synchronous, universal droplet logic and control.”

According to the Stanford researchers, this new type of computer offers up a way to produce an alternative to high-speed, complex, electronic computers and take logic processing to the physical world. In this way, the fluidic computer may find applications in such areas as biology, chemistry, and other physical sciences and technology that use processes more akin to the properties of organization found in nature.

“We already have digital computers to process information,” says Prakash. “Our goal is not to compete with electronic computers or to operate word processors on this. Our goal is to build a completely new class of computers that can precisely control and manipulate physical matter. Imagine if when you run a set of computations that not only information is processed but physical matter is algorithmically manipulated as well. We have just made this possible at the mesoscale.”

water-droplet-computer-5

To create the fluidic logic, Prakash and Stanford graduate student Georgios Katsikis constructed assortments of miniscule iron blocks on glass slides to act as physical logic gates. Resembling a Pac-Man maze, the whole structure is filled with oil and topped with a clear glass slide, so that the fluid is sandwiched between the layers. To this, the researchers syringe in separate magnetic-nanoparticle-infused droplets of water.

They then surrounded the device with a series of large electromagnetic coils that, when turned on induce a magnetic field in the iron bars. As this magnetic field has its polarity alternately and continuously changed, so too there is a change in the induced magnetic field of the iron bars, and the magnetized water droplets are drawn around the circuit. Each alternation of the electromagnetic field amounts to one clock cycle, and each drop moves exactly one step onward with each of these cycles.

To observe the process, a video camera is used to capture the exchanges between individual droplets, and to observe fluidic computation in real time. As such, the ones and zeroes of binary code are represented by the presence or absence of a water droplet, with the magnetically-induced clock cycle ensuring that the droplets transfer in a flawless symphony that, the researchers believe, means the system can practically run forever without errors.

“Following these rules, we’ve demonstrated that we can make all the universal logic gates used in electronics, simply by changing the layout of the bars on the chip,” says Katsikis. “The actual design space in our platform is incredibly rich. Give us any Boolean logic circuit in the world, and we can build it with these little magnetic droplets moving around.”

The team also believes that, from the viewpoint of fundamental science, the work is exciting because it provides a new aspect on computation in the physical world. As such, just as the physics of calculation have been used to understand the limits of electronic computation, now the physical features of bits of information may be exploited in some novel way to control matter at the mesoscale (10 microns to 1 mm).

Given that the new system is also physically strong compared to electronic devices and adheres to universal design rules, Prakash and his team intend to produce a design tool for these fluidic circuits for anyone to use.

“We’re very interested in engaging anybody and everybody who wants to play, to enable everyone to design new circuits based on building blocks we describe in this paper or discover new blocks,” Prakash says. “Right now, anyone can put these circuits together to form a complex droplet processor with no external control – something that was a very difficult challenge previously. If you look back at big advances in society, computation takes a special place. We are trying to bring the same kind of exponential scale up because of computation we saw in the digital world into the physical world.”

References:http://www.gizmag.com/

HGST’s helium-filled HDD offers a world-first 10 TB of storage

hgst-hdd

HGST’s Ultrastar Archive Ha10 is aimed at enterprise users

We first caught wind of HGST’s high capacity hard drives in 2012, when the company claimed it could boost storage capacities by 40 percent by replacing regular old air inside the drive enclosure with helium. The Western Digital subsidiary stayed the course, producing a helium-based 6 TB HDD in 2013 and 8 TB model in 2014, and has now continued the upward trend with the world’s first 10 TB hard drive.

Aimed squarely at enterprise and data centers, the Ultrastar Archive Ha10 is the company’s latest take on a helium-based HDD. The apparent benefits of helium when it comes to HDD storage is its markedly lower density of around one-seventh that of regular air. This means less friction with internal moving parts, resulting in less power needed to drive the device and increased data density of the individual disks.

HGST calls its version of this HelioSeal and has combined it with shingled magnetic recording (SMR), a hard drive technology that records data on overlapping rather than parallel tracks, much like roof shingles (hence the name). The company says this results in an industry-leading storage density, low power consumption and ever-reliable storage solution. However, since SMR requires the writing of entire tracks, the drive is suited for active archive duties rather than frequent update workloads.

Further to its mammoth storage capacity, the 3.5-in drive is rated at two million hours mean time between failure (MTBF) and a 10-15 unrecoverable reduced bit error rate with 600k load-unload cycles. It comes in SATA 6 Gbps and SAS Gbps varieties and HGST claims a 20 percent improvement in Watts per TB over the preceding Ultrastar He8.

To begin with, the Ultrastar Archive Ha10 will be available to cloud and OEM storage clients with the software capabilities to harness the density of the device.

References:http://www.gizmag.com/

Earth’s oceans found to be a much greater source of greenhouse gas than previously believed

mit-nitrous-oxide-oceans

Researchers pictured with one of the sampling devices used to collect readings of the Pacific Ocean

A new study by MIT has revealed that the quantities of nitrous oxide (N2O), otherwise known as laughing gas, being released by the world’s oceans has been dramatically underestimated. Heightened levels of N2O have the potential to seriously influence the health of our planet’s ozone layer, as the gas is around 300 times more potent than the more prevalent menace of carbon dioxide emissions.

N2O is created, and subsequently largely destroyed, in the boundary between the oxygen saturated layer of water near an ocean’s surface, and the anoxic waters that lie beneath. Nitrogen is initially introduced to the marine environment from a number of sources, including as a runoff from agricultural fertilizer in the form of ammonia. The nitrogen is then consumed by bacteria and marine microbes that produce N2O as a byproduct.

“The denitrifying bacteria that produce N2O also consume it, and it was thought that these two processes are pretty tightly coupled,” states Andrew Babbin, MIT postdoc at the Department of Civil and Environmental Engineering and lead author of a paper on the study. “But that’s not the case in the suboxic layer, resulting in leftover N2O that leaks away to the surface.”

Prior to the study, it was not well understood just how much of the gas was escaping the ocean and entering the environment above, and the potential harm that this could be inflicting on our planet’s fragile atmosphere.

Babbin and his team were able to gain a better understanding by making a computer analysis of water samples from various depths at three different locations in the eastern tropical North Pacific, in order to determine denitrification rates for the region.

Results appear to show that previous estimates on the quantities of N2O escaping the oceans may have been off by as much as a factor of 10. By making use of recent climate models, Babbin and his team estimate that our world’s oceans could be producing as much as 4 million metric tons of N2O per year

This output of the harmful gas has the potential to seriously harm Earth’s ozone layer, and it is predicted that production will rise as agricultural growth continues, introducing ever more nitrogen into Earth’s oceans.

References:http://www.gizmag.com/