New technology could fundamentally change future wireless communications

15-newtechnolog

Radio systems, such as mobile phones and wireless internet connections, have become an integral part of modern life. However, today’s devices use twice as much of the radio spectrum as is necessary. New technology is being developed that could fundamentally change radio design and could increase data rates and network capacity, reduce power consumption, create cheaper devices and enable global roaming.

A pioneering team of researchers from the University of Bristol’s Communication Systems and Networks research group, have developed a new technique that can estimate and cancel out the interference from one’s own transmission, allowing a radio device to transmit and receive on the same channel at the same time. This therefore requires only one channel for two-way communication, using half as much spectrum compared to the current technology.
Leo Laughlin, a PhD student from the University’s EPSRC Centre for Doctoral Training (CDT) in Communications, together with MSc student Chunqing Zhang, supervisors Professor Mark Beach and Dr Kevin Morris, and industrial mentor, Dr John Haine at u-blox, have designed and built a novel full-duplex transceiver architecture, which combines electrical balance isolation and active radio frequency cancellation. Their prototype can suppress interference by a factor of over 100 million and uses low-cost, small form factor technologies, making it well suited to use in mobile devices such as smartphones and tablets.
This important change in radio design could offer a range of benefits. In Wi-Fi systems this would double the capacity of a Wi-Fi access point, allowing more users and higher data rates. For cellular systems, full-duplex operation would also deliver increased capacity and data rates, or alternatively the network operators could provide the same total network capacity with fewer base station sites, giving obvious benefits in the cost and environmental impact of running the network.
Leo Laughlin, who is in the first cohort of students in the CDT in Communications, said: “Until now there has been a fundamental unsolved problem with radio communication. Since the radio spectrum is a limited resource, and with network operators paying billions of pounds to access the spectrum, solving this problem would bring us one step closer to the faster, cheaper and greener devices of our connected future.”
As well as being part of the evolution to 5G mobile, this research is also very relevant to the design of the radio circuitry in current 3G and 4G cellular mobile devices. In today’s mobile devices, a separate filtering component is required for each frequency band, and because of this, today’s mobiles phone do not support all of the frequency channels which are in use across the world. Different devices are manufactured for different regions of the world, and there are currently no 4G phones capable of unrestricted global roaming. Replacing these filters with the research team’s duplexer circuit would create smaller and cheaper devices, and would allow manufacturers to produce a single model for the entire world. This would enable global roaming on 4G and would further decrease cost through greater economies of scale.
Mark Beach, Professor of Radio Systems Engineering, commented: “In addition to EPSRC’s investment in Doctoral Training Centres at Bristol, we have also been awarded equipment funding. Leo and Chunqing have taken full advantage of the new laboratory facilities in the validation and optimisation of our full-duplex architecture.”
The team have published papers about their research in the IEEE Journal on Selected Areas in Communications special issue on full duplex radio, and in this month’s issue of the IEEE Communications Magazine, and patents have been filed to protect the novel duplexer design.

References:http://phys.org/

Students build portable hybrid power system to help in natural disasters

studentsbuil

When natural disasters like the earthquakes in Nepal or the volcano eruption in Chile occur, one of the most pressing issues hindering rescue efforts is the loss of electricity.
A senior design project completed by three students in the College of Engineering may help bring power back quicker to those dealing with the aftermath.
Project leader Andre Lima Siuffo, Marisol Contreras and Kevin Gregorio designed and built a portable and low-cost renewable system that utilizes both solar electric and wind electric technologies to generate power.
With support from professors Andres Tremante and Sabri Tosunoglu, the system Siuffo and his team created uses a wind turbine and solar panel that work in tandem to charge a battery bank that can be used to provide electricity.
“One of the main purposes of the project was to prove that it is technically very easy to build a hybrid system and it’s not expensive at all,” said Siuffo, a mechanical engineering major graduating this summer.
The hybrid system is capable of producing 1.5 kilowatthours (kWh) per day. While not enough to power an average American household, which uses around 30 kWh per day, these portable systems can be particularly useful in remote areas and emergency situations.
The ability to power laptops, light bulbs, hot plates and other devices with consistent and continuous energy is critical in areas ravaged by disaster. Multiple units used together can potentially help relief teams in natural disaster situations provide electricity to perform a wide range of essential services.
“The capacity to generate this much power can be lifesaving in many situations,” Siuffo said. “We wanted to find a balance between producing power and maintaining portability.”
With each unit weighing about 250 pounds, they can be transported on pickup trucks and assembled and disassembled in a matter of minutes.
While similar systems normally run between $5,000 and $10,000 per unit, Siuffo and his team were able to create a fully functional prototype for approximately $1,700.
Tremante and the senior design team that built the power system hope that with support from the private sector, these prototypes can one day be produced commercially.
“We want to bridge the gap between the university and the industry through sustainable development projects,” Tremante said.

References:http://phys.org/

Human vs machine as top poker pros take on AI

mg22630202.100-1_1200 (1)

IT’S humans versus machine at the Rivers casino in Pittsburgh, Pennsylvania. Four professional poker players are squaring up to an artificial intelligence over two weeks, duking it out by playing a total of 80,000 hands of poker for a $100,000 cash prize.

This may turn out to be the latest instalment in a grand tradition of computers beating us at our own games. In 1997, IBM’s Deep Blue computer famously beat chess great Garry Kasparov. Four years ago, IBM’s Watson took part in the TV quiz show Jeopardy! and crushed two contestants with a strong track record. AI has even mastered the popular smartphone game 2048.

Still, poker is a tough nut to crack. In a game like chess, everyone knows where all the pieces are on the board. By contrast, poker is a game of imperfect information: players don’t know for sure what cards the others hold or what will come up next in the deck. That makes it a challenge for any player, human or computer, to choose the right play.

Computer scientists have already made some progress, at least with simpler forms of the game. But the version being played at the Pittsburgh tournament, called Heads Up No Limit Texas Hold ’em, is “a completely different beast”, says pro player Vanessa Selbst. “There’s much more human elements and game strategies to employ, so it’s a much more complex game.” What’s more, there are no betting limits, so the computer also has to take into account how much players might stake on each game.

Competing in Pittsburgh is Claudico, a program created at the city’s Carnegie Mellon University. Claudico taught itself poker skills by playing trillions of games in search of some kind of optimal strategy. Whatever it has picked is pretty good: last year, Claudico beat all 13 other computer competitors at no-limit poker in the annual contest run by the Association for the Advancement of Artificial Intelligence.

Computers have a few edges over humans, says graduate student Noam Brown, part of the team behind Claudico. For example, a computer can switch randomly between various betting strategies, which may confuse human opponents.

On the other hand, Claudico is slow to pick up on and adapt to people’s playing styles – something that many pro players do with ease. “One of our big concerns is that the human will be able to identify weaknesses that Claudico has and exploit them,” says Brown.

Because Claudico taught itself to play, even the team that built it don’t quite know how it picks its moves. “We’re putting our faith in Claudico. It knows much better than we do what it’s doing.”

Algorithms like those used to play poker could be valuable for other kinds of problems characterised by imperfect information. They could suggest optimal locations for military resources in a war, for example. Rival AIs could also be tasked to negotiate with each other over insurance rates or handle legal squabbles. “In society, sometimes you see one side getting screwed over because someone has more lawyers or more information or more resources at their disposal,” says Brown. “Something like this can really level the playing field.”

The winner of the poker tournament won’t be crowned until the event ends on 7 May. Eric Jackson, a software engineer who creates poker bots as a hobby, is cautiously optimistic that Claudico can win. As we went to press, the pros and Claudico were neck and neck.

Even if AI triumphs, it won’t mean programmers have conquered the game. “Beating humans decisively would be a landmark, but it wouldn’t mean the end of work on poker,” says Jackson. “We still don’t know what the perfect strategy is.”

References:http://www.newscientist.com/

Polysis is marketing a plastic that turns to clay

555725bf008af

Polysis is showing a plastic that can turn to clay when heated, according to a story on DigInfo TV. Polysis is described as a specialist developer of polyurethane resins and resin products, and they are marketing haplafreely, presented with a lower-case “h,” as a plastic that turns to clay when heated to temperatures above 60 degrees Centigrade.

Immerse the product in hot water—or heat it with a heat gun—and you find that the plastic is easy to shape, yet hardens again as it cools—and returns to its original hardness by the time it reaches room temperature.
Takato Mori, development division of Polysis, said the product remains in its clay state—staying malleable— five to 10 times longer than other products.”It also has a tensile strength,” he said, “three times greater than ordinary rubber, making it hard to break.”
It’s not difficult to peel off haplafreely; it won’t stick easily to other materials, according to DigInfo TV. It is softer than other plastics. As a cover material, it will not damage the product to which it is applied.
Promoted benefits include cutting costs. One does not have to think about thermal design or processing; the product can be formed into different shapes without them. “When heated, it will return to clay time and time again, making it ideal as a way of reducing costs in production line jigs.”
Real-world uses? The presentation suggested haplafreely as a cover for various components. Mori said haplafreely can be used to form bases on which to place unstable objects. For example, engine components need to be placed on a base for stability. Another case, he said, might be where motorcycle handlebars need to be worked on with a screwdriver. Haplafreey can be used in large quantities for protective covering.

Polysis is currently selling haplafreely in sheets measuring 40cm x 40cm and 4mm in thickness, and is aiming for monthly sales of 1,000 sheets, but haplafreely is also available in roll form, in thicknesses ranging from 0.6mm to 1.0mm.
The DigInfo TV report stated that “Polysis has received many requests from users for products that become soft at 70, 80 or 100°C, and will begin developing these this year.”
Commenting, Lee Mathews in Geek.com said the product was “noteworthy for its ability to become malleable with a minimal amount of heat applied.” He said haplafreely could make a difference on production lines. “If parts can be molded at a lower temperature, that means reduced energy use and shorter production times, which ultimately turns into either savings for you and me or higher profit margins for the producer. Or maybe even both.”

References:http://phys.org/